The drum dнаездник is a drying equipment for disposing a wide range of materials. Что еще более важно, the good operation of a drum dryer, not only ensures the normal production, but also appropriately extends the machine’s service life and reduces production costs. Следовательно, the correct operation of the equipment as well as maintenance are very necessary.

Однако, the maintenance of сушилка needs cost. Так, how to reduce maintenance cost of барабанная сушилка? We will come up with appropriate insights.

Dryers for Sale

Dryers for Sale

Dryers for Sale

3 Tips to Reduce Maintenance Cost of Drum Dryer

  • Examination Before Starting A Fertilizer Dryer

    Before running а Сродяга для удобрений, you will primarily make sure whether all of the parts are intact, а lubricant is sufficient, and power cords and switches are in good condition or not. To be honest, these may make сушилки run more stably, reduce the probability of equipment failure so that you will get lower equipment maintenance costs.

  • Focusing on Operation Steps

    Please refer to the operation manual we design before using а сушка машина to reduce damage caused by human causes. В то же время, when а сушилка is running, it is also necessary to check it regularly to see whether the equipment is damaged or lack of lubricating oil. Как результат, it can also reduce equipment maintenance costs.

  • Periodic Вleaning Барабанная сушилка

    After finishing а drying equipment’s works, you need to clean the entire equipment, which can not only ensure сушилка smooth operation, but also improve the service life of this machine. Более того, you will undergo a trial, no-load operation before using the rotary drum dryer for the next time. And, you can’t start production until the equipment is normally running.

Important Information

Which Aspects of The Dryer’s Maintenance You Should Know?

As is well-known, bearings take on all the load of а сушка машина, so good lubrication has a great relationship with the service life of bearings. Кроме, it directly affects the service life of the whole machine and the operation rate. Таким образом, the injection of lubricating oil must be clean and good sealing. What aspects need lubricant injection? These contains rotating bearing, roller bearing, all gears, movable bearing, и sliding plane.

  • Во-вторых, you must check newly installed rolling rings frequently because they are prone to loosening.

  • В третьем месте, pay attention to operation situation of all parts of сушилки.

  • Fourthly, focus on checking the wear degree of components, and pay attention to replace worn parts in time.

Lubricant On Gears

Lubricant On Gears

Lubricant On Gears

Structure of Drum Dryer

Structure of Drum Dryer

Structure of Drum Dryer

  • Fifthly, you should remove any sundries and dirt on the base ground where the movable device is placed. В противном случае, the movable bearings cannot move when сушилка encounters obstacles, resulting in serious accidents.

  • Sixthly, if the oil temperature of bearings is too high, you should immediately stop to seek causes and eliminate hidden troubles.

  • Окончательно, if there is noise when the rotating gears are running, you ought to stop at once for inspection and elimination.

Details

What Are The Contents of Drum Dryer’s Maintenance Work?

What Are The Contents of Drum Dryer’s Maintenance Work?

Daily Maintenance

Daily Maintenance

Daily Maintenance

1st Best solution

Daily Maintenance Work

Daily Maintenance Work

  • You can wipe а сушилка every day with a soft cotton cloth to keep the appearance clean.

  • You should check the R.L. (air filter, pressure regulating valve & atomized lubricator) before running every day. When lubricating oil is insufficient, you need to add and discharge the stored water.

  • You ought to remove dust from the dust collector for keeping good ventilation, which makes great drying effects.

2nd Best solution

Monthly Maintenance Work

  • 1

    Open the rear box cover to clean the internal part of the dryer with a soft cotton cloth.

  • 2

    Add lubricating oil to moving components like bearings to reduce friction.

  • 3

    Check the belt tension and adjust the pulle

  • 4

    Strengthen the parts whichare prone to loosening while the dryer is vibrating, including electrical circuit and joints.

  • 5

    Clean the internal dust of сушилки

Monthly Maintenance

Monthly Maintenance

Monthly Maintenance

Annual Maintenance

Annual Maintenance

Annual Maintenance

3rd Best solution

Annual Maintenance Work

Annual Maintenance Work

  • Check whether the fixing bolts of the frame are loose and firm them.

  • Check the tightness situation of the supporting spring connection and adjust it in time.

  • Check the ground connection of а сушка equipment and ensure reliability.

В заключение, the above is сушилка’s maintenance content. All in all, the quality of the сушилки is directly related to the service life, production efficiency and production safety. Одним словом, right operation and regular examination are fundamental to reduce production costs. Также, the maintenance and cleaning play an important role in ensuring the normal operation of а drying machine. Поэтому, doing a good job of daily maintenance work is of great help to extend the service life of the rotary drum dryer.

Получите бесплатную цитату сейчас!

      8. Введите ответ 5 х 7